One number counts its significant figures. An expression like 2.5 x 3.42 applies the sig fig rules. Put an exact number in [brackets]. One number on each line makes a list.

Round to (significant figures)
Try

Significant figures

0.004503significant figures

Digit by digit

.

Tap or hover a digit to see why it counts, or why it does not.

  • Significant
  • Not significant
  • Standard form0.00450
  • Scientific notation4.50 × 10−3
  • E notation4.50e-3
  • Significant figures3
  • Decimal places5
  • Last significant digithundred-thousandths place
Step-by-step solution
  1. Read the digits

    The number is 0.00450.

    Without the sign, the decimal point and the separators, its digits are 000450.

  2. Sort the digits with the rules

    Non-zero digits: 4, 5. Always significant.

    3 leading zeros (before the first non-zero digit). They only show where the decimal point goes, so they are not significant.

    1 trailing zero after a decimal point. Significant: they show the value was known to that place.

  3. Count

    Significant digits: 450. That is 3 significant figures.

  4. Where the precision ends

    The last significant digit is in the hundred-thousandths place.

    That is 5 decimal places.

Check my answer

Worked it out by hand? Type your answer (just the count, when counting) and see whether it is right, has the wrong number of sig figs or hides ambiguous zeros.

Practice

How many significant figures does 0.0905 have?

Streak 0 · Correct 0 of 0

A significant figures calculator counts the significant figures in a number, rounds a number to any chosen count and applies the multiplication and addition rules to a calculation. Every non-zero digit counts, zeros between digits count, leading zeros never count, and trailing zeros count only when the number has a decimal point.

Type 0.00450 and the digit strip shows which digits count and why. Type 1200 and the calculator reports the range, 2 to 4, with the way to write each count without ambiguity. To round to a fixed count, open the 3 significant figures calculator or the 2 significant figures calculator. For decimal places or the nearest ten, use the rounding calculator.

How to use the significant figures calculator

  1. Type a number or an expression: 0.00450, 1200, 6.022e23, 2.5 x 3.42 or 12.11 + 18.0 + 1.013. One box decides the job. A single number is counted, a single number with a Round to setting is rounded, and an expression is calculated.
  2. Read the digit strip. Every digit is a tile. Filled tiles are significant, outlined tiles are not and striped tiles are trailing zeros that could go either way. Tap or hover a tile for the reason.
  3. Pick Round to 1 through 15 to round to that many significant figures. Half up raises every 5, the usual school rule. Half to even raises an exact 5 only when that makes the kept digit even, the rule in NIST’s rounding guidance.
  4. Set the trailing zeros policy. Placeholder, the default, reads 1200 as 2 significant figures. Significant reads it as 4.
  5. Put an exact number in square brackets, as in [2] x 3.14 x 4.5, so it never limits the answer.
  6. Paste several numbers, one per line, for list mode. Each line is counted or rounded and the table copies as CSV or tab-separated text.
  7. Type your own answer into Check my answer. The verdict is right, wrong value, or right value with too many or too few significant figures.
  8. Open Practice for fresh count, round and calculate questions with a streak counter and the rule behind every miss.

Calculations show every step and name the number that limited each operation. When an expression has two or more operations, the calculator also shows the answer you would get by rounding at every step, next to the correct one.

The five significant figure rules

A measurement carries every digit read with certainty plus one estimated digit. A burette marked every 0.1 mL and read as 24.35 mL has 4 significant figures: 24.3 is read from the marks and the 5 is estimated. A vernier caliper reading of 12.30 mm also has 4. The last zero came from the vernier scale, so it is a measured digit and it counts.

A burette and a vernier caliper on a laboratory bench, two instruments whose scales set how many digits a measurement can carry
Rule Example Significant figures Why
1. Non-zero digits always count 4.82 3 4, 8 and 2 all count
2. Zeros between non-zero digits count 7008 4 Both zeros sit between the 7 and the 8
3. Leading zeros never count 0.00208 3 The zeros before the 2 only place the decimal point. The zero between 2 and 8 counts
4. Trailing zeros count when there is a decimal point 0.00450 3 The final zero shows the value was measured to that place
5. Trailing zeros in a whole number with no decimal point are placeholders 1200 2 Ambiguous, see the next section

Count from the first non-zero digit to the last digit that counts. The sign, the decimal point and thousands separators are ignored, and so is the exponent in scientific notation. 100.10 has 5 significant figures: the 1, the two zeros after it, the next 1 and the final zero. 6.022 × 1023 has 4.

Ambiguous trailing zeros: 1200, 5000 and 100

The number 1200 could be rounded to the nearest hundred (2 significant figures), to the nearest ten (3) or measured to the unit (4). Plain notation cannot say which. The textbook default treats the zeros as placeholders, so the calculator reports 2 and shows the full range, 2 to 4. Switch the trailing zeros policy to Significant to count them all.

Write the number so the count is unambiguous.

Significant figures 1200 5000
1 not possible 5 × 103
2 1.2 × 103 5.0 × 103
3 1.20 × 103 5.00 × 103
4 1.200 × 103 or 1200. 5.000 × 103 or 5000.

A decimal point after the last zero ends the doubt: 1200. has 4 significant figures and 100. has 3. Some textbooks draw a bar over the last significant zero instead, and the calculator shows that style for ambiguous numbers. The same logic gives 100 one significant figure by default, 100. three and 100.00 five.

Round to N significant figures

  1. Find the first non-zero digit. It is digit 1.
  2. Count N digits. The last one is the kept digit.
  3. Look at the digit after it, the deciding digit. If it is 5 or more, raise the kept digit by 1. Otherwise leave it.
  4. Replace dropped digits left of the decimal point with zeros and delete dropped digits to the right of it.
Number Round to Result Scientific notation
2648 3 2650 2.65 × 103
2648 2 2600 2.6 × 103
0.004567 3 0.00457 4.57 × 10−3
1.2 4 1.200 1.200

When the kept digit is 9 and rounds up, the carry moves left. 9.996 to 3 significant figures is 10.0, a new leading digit with the count still at 3. 99.96 to 3 significant figures is 100. with the decimal point, or 1.00 × 102. Writing it as 100 would read as 1 significant figure, so the calculator adds the point or switches to scientific notation to keep the count. The same applies to 1234 rounded to 3: the answer 1230 ends in a placeholder zero, and 1.23 × 103 is the clearer form. Rounding to more digits than a number has pads zeros, so 1.2 to 4 significant figures is 1.200.

Half up and half to even differ only when the deciding digit is an exact 5 with nothing after it. 2.45 to 2 significant figures is 2.5 half up and 2.4 half to even. 2.451 is 2.5 under both rules because digits follow the 5. NIST’s guidance on rounding uses the even rule: 3.450 becomes 3.4 and 3.550 becomes 3.6. Use half up unless your instructor or lab standard says otherwise.

Multiplication and division

The answer has as many significant figures as the factor with the fewest.

Calculation Unrounded Answer Limited by
2.5 × 3.42 8.55 8.6 2.5 (2 significant figures)
12.5 ÷ 2.4 5.2083 5.2 2.4 (2)
23.45 g ÷ 5.0 mL 4.69 4.7 g/mL 5.0 (2)
100.0 ÷ 3 33.33 30 3 (1)
100.0 ÷ [3] 33.33 33.33 100.0 (4)

The last two rows show why exactness matters. If the 3 is a measurement, it has 1 significant figure and the answer is 30, better written 3 × 101. If the 3 is a count, such as three equal samples, write it as [3] and the answer keeps 4 significant figures.

Addition and subtraction

The answer is rounded to the decimal place of the least precise number. The count of significant figures does not matter here, only the position of the last digit.

12.11 + 18.0 + 1.013 = 31.123. The number 18.0 stops at the tenths place, so the answer is 31.1. Likewise 25.0 + 1.37 = 26.37, which rounds to 26.4. Subtraction can remove digits: 1.234 − 1.230 = 0.004. Both inputs reach the thousandths place, so the answer reaches it too, but it has only 1 significant figure.

Mixed operations: round only at the end

Carry every digit through the middle of a calculation, note which input limits each step, and round once at the end. Rounding at every step stacks small errors, and sometimes the final digit changes.

Expression Round at each step Round once at the end
(4.5 × 2.35) ÷ 2.1 4.5 × 2.35 = 10.575, rounded to 11. 11 ÷ 2.1 = 5.2 10.575 ÷ 2.1 = 5.0357, rounded to 5.0
4.6 + 3.47 + 3.47 4.6 + 3.47 = 8.07, rounded to 8.1. 8.1 + 3.47 = 11.6 11.54, rounded to 11.5

In both rows the middle column is wrong. The calculator shows the comparison whenever the two methods disagree. In a mix such as (2.5 × 3.42) + 1.013, the product 8.55 is good to 2 significant figures, which is the tenths place. The sum 9.563 is therefore rounded to the tenths place: 9.6.

Exact numbers

Counted items and defined conversion factors have unlimited significant figures and never limit an answer: 12 eggs in a dozen, 100 cm in 1 m. Mark them with square brackets. For the circumference of a circle, 2 × 3.14 × 4.5 = 28.26. With the 2 treated as a measurement it limits the answer to 1 significant figure, giving 30. With [2] the limit comes from 3.14 and 4.5, and the answer is 28. A length of 2.50 m converted with [100] cm/m is 250 cm, still 3 significant figures: 2.50 × 102.

A rounded constant is not exact. Typing pi as 3.14 gives it 3 significant figures.

Significant figures and decimal places

Decimal places count digits after the decimal point, trailing zeros included. Significant figures count from the first non-zero digit. Addition and subtraction work in decimal places. Multiplication and division work in significant figures.

Number Significant figures Decimal places
0.00450 3 5
12.30 4 2
45.678 5 3
0.0098 2 4
1200 2 0
1200. 4 0

The two ways of rounding give different answers. 0.04567 to 2 decimal places is 0.05, which keeps 1 significant figure. To 2 significant figures it is 0.046.

Significant figures in scientific notation

Every digit of the coefficient counts and the power of ten never does. 6.022 × 1023 has 4 significant figures and 1.20 × 103 has 3, because a trailing zero in the coefficient is deliberate. The 10 and its exponent are exact. Scientific notation is the standard fix for ambiguous numbers such as 1200. To multiply, divide or add numbers written this way, use the scientific notation calculator.

Significant figures practice

Count the significant figures in the first six numbers, then do the two calculations. The answers are in the right-hand column.

Problem Answer
0.0560 3
3004 4
450 2 (ambiguous, 2 to 3)
450. 3
0.00030 2
8.00 × 10−4 3
4.56 × 1.4 6.4
25.0 + 1.37 26.4

The Practice panel in the calculator generates new questions of each type without limit. The 3 and 2 significant figures pages open it in round-to-3 and round-to-2 mode.

Frequently asked questions

How many significant figures are in 100, 100.00, 0.01 and 0.001?

100 has 1 by the textbook rule, 100. has 3 and 100.00 has 5. Both 0.01 and 0.001 have 1, because leading zeros never count.

Does 5000 have 1 or 4 significant figures?

It has 1 under the textbook rule, because trailing zeros without a decimal point are placeholders. If the zeros were measured it has 4, so write 5.000 × 103 or 5000. to say so.

Are leading zeros significant?

No. Leading zeros only locate the decimal point. 0.0098 has 2 significant figures.

What is the difference between decimal places and significant figures?

Decimal places count digits after the decimal point. Significant figures count from the first non-zero digit. 0.00450 has 5 decimal places and 3 significant figures.

How do you round a 5?

Half up, the common school rule, always rounds a 5 up. Half to even rounds an exact 5 to the nearest even digit, so 2.45 to 2 significant figures is 2.5 half up and 2.4 half to even.

Does scientific notation change the number of significant figures?

No. Count the digits in the coefficient and ignore the power of ten. 6.00 × 103 has 3 and 6 × 103 has 1.

Do exact numbers limit significant figures?

No. Counted items and defined conversions, such as 12 eggs or 100 cm per m, have unlimited significant figures. Put them in square brackets in the calculator.

Why is 1200 ambiguous?

Its zeros could be placeholders or measured digits, so it has 2, 3 or 4 significant figures. 1.2 × 103, 1.20 × 103 and 1.200 × 103 state each count exactly.

How many significant figures are in 0.00208 and 100.10?

0.00208 has 3: the leading zeros do not count and the zero between 2 and 8 does. 100.10 has 5, because the decimal point makes the trailing zero count.

What are the rules for adding and multiplying with significant figures?

For multiplication and division, keep as many significant figures as the input with the fewest. For addition and subtraction, round to the decimal place of the least precise input.