One number counts its significant figures. An expression like 2.5 x 3.42 applies the sig fig rules. Put an exact number in [brackets]. One number on each line makes a list.
Rounded to 2 significant figures
0.0038460.00382 significant figures
Digit by digit
Tap or hover a digit to see why it counts, or why it does not.
- Significant
- Not significant
- Standard form0.0038
- Scientific notation3.8 × 10−3
- E notation3.8e-3
- Significant figures2
- Decimal places4
- Last significant digitten-thousandths place
Step-by-step solution
Find the significant digits
0.003846 has 4 significant figures. You want 2.
The digits from the first non-zero digit are 3846. Leading zeros are ignored.
.Round to 2 significant figures
The 2nd significant digit is 8 (ten-thousandths place). Keep digits up to and including it.
The deciding digit is the next one, 4 (hundred-thousandths place).
The deciding digit 4 is 4 or less, so round down: the kept digits stay as they are.
The kept digits are 38.
3846Kept digits filled, the deciding digit outlined, dropped digits grey. Keep the size of the number
Written in full: 0.0038.
Answer
0.0038 = 3.8 × 10−3 (2 significant figures).
Check my answer
Worked it out by hand? Type your answer (just the count, when counting) and see whether it is right, has the wrong number of sig figs or hides ambiguous zeros.
Practice
Round 6957 to 2 significant figures.
Streak 0 · Correct 0 of 0
To round to 2 significant figures, keep the first two digits starting from the first non-zero digit, then look at the third digit. If it is 5 or more, raise the second digit by 1. 2648 becomes 2600, 0.004567 becomes 0.0046 and 9.96 becomes 10. Type any number in the calculator above and it shows each step.
This is the round-to-2 view of the significant figures calculator, which also counts significant figures, applies the multiplication and addition rules and checks your answers. For 3 digits instead, use the 3 significant figures calculator.
How to round to 2 significant figures
- Find the first non-zero digit. Skip leading zeros and the decimal point.
- Count two digits from there. The second is the kept digit.
- Look at the third digit. If it is 5 or more, raise the kept digit by 1. If it is 4 or less, leave it.
- Replace the dropped digits left of the decimal point with zeros and delete the dropped digits to the right of it.
- If the number has only 1 significant digit, add a zero after the decimal point: 0.5 becomes 0.50.
Worked examples
| Number | To 2 significant figures | Scientific notation | What happens |
|---|---|---|---|
| 2648 | 2600 | 2.6 × 103 | The deciding digit 4 leaves the 6 alone. The last two digits become placeholder zeros |
| 0.004567 | 0.0046 | 4.6 × 10−3 | Counting starts at the 4. The deciding digit 6 raises the 5 to 6 |
| 1,234,567 | 1,200,000 | 1.2 × 106 | The deciding digit 3 leaves the 2 alone |
| 3.14159 | 3.1 | 3.1 | The deciding digit 4 leaves the 1 alone |
| 365 | 370 | 3.7 × 102 | The deciding digit is an exact 5, so half up gives 370. Half to even gives 360 |
| 9.96 | 10. | 1.0 × 101 | Carry: 9.9 plus 1 is 10. The decimal point keeps both digits significant |
| 0.0995 | 0.10 | 1.0 × 10−1 | Carry in a small number. The trailing zero stays |
| 6.022 × 1023 | 6.0 × 1023 | same | The coefficient is rounded and the power of ten is untouched |
| 0.5 | 0.50 | 5.0 × 10−1 | Padded with a zero to show 2 significant figures |
Carry, trailing zeros and the digit 5
Carry happens when the kept digit is a 9 that rounds up. 9.96 and 0.0995 both roll over to a 1 followed by a zero, and the count of significant figures stays at 2.
A rounded whole number can end in zeros that are not significant. 2600 has 2 significant figures only because its zeros are placeholders, so 2.6 × 103 is the unambiguous way to write it. When the zeros must count, as in 9.96 rounded to 10., add the decimal point.
When the third digit is an exact 5 with nothing after it, the rounding rule matters. Half up rounds 365 to 370 and 2.45 to 2.5. Half to even rounds them to 360 and 2.4, because it sends an exact 5 to the even neighbour. Half up is the default in the calculator.
When 2 significant figures are used
Measurement uncertainty is the standard case. The Guide to the Expression of Uncertainty in Measurement (GUM) says it usually suffices to quote an uncertainty to at most two significant digits, and NIST’s rounding guidance for calibration values tells users to find the first two significant digits of the expanded uncertainty. An uncertainty of 0.01234 V is reported as 0.012 V.
Two digits also suits estimates and constants quoted loosely, such as standard gravity as 9.8 m/s2 (from 9.80665). The cost is precision. Rounding to 2 significant figures moves a number by up to about 5%, against about 0.5% for 3 significant figures, so use the 3 significant figures calculator when the answer feeds further calculation. When a question or lab sheet states a number of significant figures, use that number.
Frequently asked questions
How do you round 365 to 2 significant figures?
370 by the half up rule, because the deciding digit is 5. Half to even gives 360.
What is 0.0995 to 2 significant figures?
0.10. The third digit 5 raises the 9 to 10, which carries into the first digit and leaves 0.10 with 2 significant figures.
How many significant figures does 10 have?
10 has 1 by the textbook rule and 10. has 2. Rounding 9.96 to 2 significant figures gives 10. or 1.0 × 101.
What is 2648 to 2 significant figures?
2600, written 2.6 × 103 to make clear that only 2 digits count.
Is 2 significant figures the same as 2 decimal places?
No. 0.04567 to 2 decimal places is 0.05 and to 2 significant figures is 0.046. Decimal places count from the decimal point and significant figures count from the first non-zero digit.