One number counts its significant figures. An expression like 2.5 x 3.42 applies the sig fig rules. Put an exact number in [brackets]. One number on each line makes a list.
Rounded to 3 significant figures
264826503 significant figures
The trailing zero here would be read as placeholders. Write 2.65 × 103 to make every digit count.
Digit by digit
Tap or hover a digit to see why it counts, or why it does not.
- Significant
- Standard form2650 (trailing zeros are placeholders)
- Scientific notation2.65 × 103
- E notation2.65e3
- Significant figures3
- Decimal places0
- Last significant digittens place
Step-by-step solution
Find the significant digits
2648 has 4 significant figures. You want 3.
The digits from the first non-zero digit are 2648. Leading zeros are ignored.
Round to 3 significant figures
The 3rd significant digit is 4 (tens place). Keep digits up to and including it.
The deciding digit is the next one, 8 (ones place).
The deciding digit 8 is 5 or more, so round up.
Add 1 to the last kept digit: 264 becomes 265.
2648Kept digits filled, the deciding digit outlined, dropped digits grey. Keep the size of the number
Digits dropped to the left of the decimal point are replaced by zeros so the number keeps its size: 2650.
Those trailing zeros are placeholders. Written without a decimal point they read as 3 significant figures by the usual rule, so 2.65 × 103 is the unambiguous way to write 3 significant figures.
Answer
2650 = 2.65 × 103 (3 significant figures).
Write it so the zeros cannot be misread
The trailing zero here would be read as placeholders. Write 2.65 × 103 to make every digit count.
- 3 sig figs2.65 × 103
Check my answer
Worked it out by hand? Type your answer (just the count, when counting) and see whether it is right, has the wrong number of sig figs or hides ambiguous zeros.
Practice
Round 48.7261 to 3 significant figures.
Streak 0 · Correct 0 of 0
To round to 3 significant figures, keep the first three digits starting from the first non-zero digit, then look at the fourth digit. If it is 5 or more, raise the third digit by 1. 2648 becomes 2650, 0.004567 becomes 0.00457 and 9.996 becomes 10.0. Type any number in the calculator above and it shows each step.
This is the round-to-3 view of the significant figures calculator, which also counts significant figures, applies the multiplication and addition rules and checks your answers. For 2 digits instead, use the 2 significant figures calculator.
How to round to 3 significant figures
- Find the first non-zero digit. Skip leading zeros and the decimal point.
- Count three digits from there. The third is the kept digit.
- Look at the fourth digit. If it is 5 or more, raise the kept digit by 1. If it is 4 or less, leave it.
- Replace the dropped digits left of the decimal point with zeros and delete the dropped digits to the right of it.
- If the number has fewer than 3 significant digits, add zeros after the decimal point until it has 3: 4.5 becomes 4.50.
Worked examples
| Number | To 3 significant figures | Scientific notation | What happens |
|---|---|---|---|
| 2648 | 2650 | 2.65 × 103 | The deciding digit 8 raises the 4 to 5. The final 0 is a placeholder |
| 0.004567 | 0.00457 | 4.57 × 10−3 | Counting starts at the 4. The deciding digit 7 raises the 6 to 7 |
| 1,234,567 | 1,230,000 | 1.23 × 106 | The deciding digit 4 leaves the 3 alone. The rest become zeros |
| 3.14159 | 3.14 | 3.14 | The deciding digit 1 leaves the 4 alone |
| 299,792,458 | 300,000,000 | 3.00 × 108 | Carry: 2.99 rounds up to 3.00. Written out, 300,000,000 reads as 1 significant figure, so use the scientific form |
| 9.996 | 10.0 | 1.00 × 101 | Carry: 9.99 plus 1 is 10.0 |
| 99.96 | 100. | 1.00 × 102 | Carry. The decimal point keeps all 3 zeros and digits significant |
| 0.09996 | 0.100 | 1.00 × 10−1 | Carry in a small number. The trailing zeros stay |
| 6.022 × 1023 | 6.02 × 1023 | same | The coefficient is rounded and the power of ten is untouched |
| 4.5 | 4.50 | 4.50 | Padded with a zero to show 3 significant figures |
Carry, trailing zeros and the digit 5
Carry happens when the kept digit is a 9 that rounds up. The digits roll over, 9.99 becomes 10.0, and the count of significant figures stays at 3 even though the number gained a leading digit.
A rounded whole number can end in zeros that are not significant. 1230 has 3 significant figures only because its last zero is a placeholder, so 1.23 × 103 is the unambiguous way to write it. When the zeros must count, as in 99.96 rounded to 100., add the decimal point.
When the fourth digit is an exact 5 with nothing after it, the rounding rule matters. Half up rounds 2.345 to 2.35. Half to even rounds it to 2.34 because the kept 4 is already even. Change the rule in the calculator’s rounding setting. Half up is the default.
When 3 significant figures are used
Cambridge IGCSE Mathematics papers tell candidates to give non-exact numerical answers correct to 3 significant figures, or 1 decimal place for angles in degrees, unless the question specifies a different level of accuracy. Read the question first: a stated accuracy always overrides the default.
Three digits is also the precision of familiar constants: pi is 3.14, the speed of light is 3.00 × 108 m/s and standard gravity, 9.80665 m/s2, is 9.81. Rounding to 3 significant figures moves a number by at most about 0.5%. Rounding to 2 moves it by up to about 5%, which is the case for the 2 significant figures calculator.
Frequently asked questions
What is 0.004567 to 3 significant figures?
0.00457. The leading zeros do not count, so the three digits are 4, 5 and 6, and the deciding digit 7 raises the 6 to 7.
How do you round 9.996 to 3 significant figures?
10.0. The kept digits 9.99 round up to 10.0, which still has 3 significant figures.
Does 100 have 3 significant figures?
No. 100 has 1 by the textbook rule, 100. has 3 and 1.00 × 102 has 3. To round 99.96 to 3 significant figures, write 100. or 1.00 × 102.
What is 1,234,567 to 3 significant figures?
1,230,000, or 1.23 × 106. The deciding digit is 4, so the third digit stays at 3.
Is 3 significant figures the same as 3 decimal places?
No. 3.14159 to 3 decimal places is 3.142 and to 3 significant figures is 3.14. Decimal places count from the decimal point and significant figures count from the first non-zero digit.
How do you round when the fourth digit is exactly 5?
Half up raises the third digit: 2.345 becomes 2.35. Half to even raises it only when the result is even, so 2.345 becomes 2.34.