Short answer: multiply the electricity you used in kilowatt-hours (kWh) by the emission factor of the grid or power plant that supplied it, in kilograms of CO2 per kWh. The average US grid emits about 0.35 kg (0.77 lb) of CO2 per kWh, so 900 kWh works out to about 313 kg (690 lb). Coal power runs near 1.05 kg per kWh, natural gas near 0.44 kg and wind or nuclear near zero at the plant.
The arithmetic is one multiplication. The work is in choosing the right emission factor, because the same kWh carries six times more CO2 on a coal-heavy grid than on a hydro and nuclear one. This guide gives the formula, current factors for the US and other countries, how to derive a factor from the fuel itself and the unit mistakes that throw results off by a factor of 1,000.
At a glance
What you need
- kWh used (from your bill or an energy meter)
- An emission factor for your grid or power source
- A calculator
Steps
- Find your kWh for the period.
- Look up the emission factor for your grid.
- Convert the factor to kg per kWh.
- Multiply kWh by the factor.
This guide contains Amazon affiliate links. 33Science earns a commission on qualifying purchases. See our affiliate disclosure.
The formula
CO2 (kg) = electricity used (kWh) × emission factor (kg CO2/kWh)
The emission factor, also called carbon intensity, is the mass of CO2 released for each kWh generated. Agencies publish it in different units, so convert it before you multiply:
| Published as | Convert to kg CO2/kWh | Example |
|---|---|---|
| lb/MWh (EPA eGRID) | multiply by 0.0004536 | 767.2 lb/MWh = 0.348 kg/kWh |
| lb/kWh (EIA) | multiply by 0.4536 | 0.81 lb/kWh = 0.367 kg/kWh |
| g/kWh (Ember, IPCC) | divide by 1,000 | 458 g/kWh = 0.458 kg/kWh |
| kg/MWh or t/GWh | divide by 1,000 | 348 kg/MWh = 0.348 kg/kWh |

To find the kWh for a single appliance, multiply its power in kilowatts by the hours it runs: a 1.5 kW space heater running 4 hours uses 6 kWh. A plug-in energy meter measures it directly for anything that plugs into a wall outlet.
Worked example: a US household
- Find the kWh. The bill shows 900 kWh for the month.
- Find the factor. EPA eGRID 2023 gives the US average as 767.2 lb CO2/MWh.
- Convert it. 767.2 × 0.0004536 = 0.348 kg CO2/kWh.
- Multiply. 900 kWh × 0.348 kg/kWh = 313 kg CO2 (690 lb) for the month, or about 3.8 tonnes a year.
Location changes the answer more than anything else. The same 900 kWh produces 99 kg of CO2 in upstate New York (mostly hydro and nuclear) and 570 kg in the MRO East grid of eastern Wisconsin (mostly coal). Use the factor for your eGRID subregion, which EPA’s Power Profiler finds from a zip code.
CO2 emission factors per kWh
US grid regions (eGRID 2023)
| Grid | kg CO2 per kWh | lb CO2 per kWh |
|---|---|---|
| US average | 0.348 | 0.767 |
| Upstate New York (NYUP) | 0.110 | 0.242 |
| California (CAMX) | 0.194 | 0.429 |
| New England (NEWE) | 0.245 | 0.539 |
| Texas (ERCT) | 0.333 | 0.734 |
| Florida (FRCC) | 0.355 | 0.782 |
| Ohio Valley, RFC West (RFCW) | 0.413 | 0.911 |
| Rockies (RMPA) | 0.470 | 1.037 |
| MRO East (MROE) | 0.634 | 1.397 |
| Oahu, Hawaii (HIOA) | 0.676 | 1.490 |
Countries (Ember, 2025)
| Country or region | g CO2e per kWh | Main sources |
|---|---|---|
| India | 670 | Coal |
| China | 525 | Coal, hydro, wind, solar |
| Japan | 477 | Gas, coal, nuclear |
| World average | 458 | Mixed |
| United States | 384 | Gas, nuclear, coal, wind |
| European Union | 210 | Nuclear, wind, gas, hydro |
| Brazil | 110 | Hydro, wind |
Ember counts life-cycle CO2-equivalent (mining, fuel transport and methane leaks included), so its US figure sits above the eGRID number, which counts only what leaves the smokestack.
By power source
| Source | At the plant (EIA, US 2023) | Life cycle (IPCC median) |
|---|---|---|
| Coal | 1.05 kg (2.31 lb) | 0.82 kg |
| Oil | 1.12 kg (2.46 lb) | n/a |
| Natural gas | 0.44 kg (0.96 lb) | 0.49 kg (combined cycle) |
| Solar PV | 0 | 0.041 to 0.048 kg |
| Hydropower | 0 | 0.024 kg |
| Nuclear | 0 | 0.012 kg |
| Wind | 0 | 0.011 to 0.012 kg |

The EIA coal figure is the fleet average for 2023. The IPCC median of 0.82 kg describes a modern pulverized coal plant, which burns less coal per kWh than the older US fleet. More on each source in our guides to non-renewable energy sources, alternative energy and nuclear energy.
How to calculate the factor from the fuel
For a single power plant, combine its heat rate (fuel energy burned per kWh generated) with the fuel’s CO2 factor:
kg CO2/kWh = heat rate (Btu/kWh) × fuel factor (kg CO2/MMBtu) ÷ 1,000,000
| Plant | Calculation (2025 US averages) | Result |
|---|---|---|
| Natural gas | 7,781 Btu/kWh × 53.06 kg/MMBtu | 0.41 kg/kWh |
| Bituminous coal | 10,647 Btu/kWh × 93.28 kg/MMBtu | 0.99 kg/kWh |
Why gas emits less than coal
Burning methane releases 890 kJ per mole: CH4 + 2O2 → CO2 + 2H2O. One kWh is 3,600 kJ, so it takes 4.04 mol of methane to release 1 kWh of heat, which makes 4.04 mol of CO2, or 178 g (CO2 has a molar mass of 44.01 g/mol).
A gas plant turns about 44% of that heat into electricity (3,412 Btu per kWh divided by the 7,781 Btu heat rate), so each kWh delivered carries 178 ÷ 0.44 = 405 g of CO2. Coal releases about 318 g per kWh of heat and its plants run near 32% efficiency, which is why coal power emits about 2.4 times more CO2 per kWh than gas.
If a source reports carbon (C) instead of carbon dioxide, multiply by 44.01 ÷ 12.011 = 3.664. One kilogram of carbon burned becomes 3.66 kg of CO2 because each carbon atom picks up two oxygen atoms.
Which emission factor to use

| Purpose | Use | US value |
|---|---|---|
| Your home or business footprint | Grid average for your region | 0.348 kg/kWh |
| Footprint including line losses | Grid average ÷ (1 − 0.042) | 0.363 kg/kWh |
| Savings from using less power | Non-baseload (marginal) rate | 0.623 kg/kWh |
| Comparing technologies | IPCC life-cycle medians | see table above |
The non-baseload rate is higher because the plants that ramp down when demand falls are mostly gas and coal, not nuclear or wind. eGRID publishes it for estimating the CO2 avoided by efficiency projects and rooftop solar.
For business reporting
Corporate reports under the GHG Protocol use two Scope 2 numbers: the location-based figure (grid average) and the market-based figure, which uses the factor from your supplier contract or renewable energy certificates.
Common mistakes
| Mistake | Effect | Fix |
|---|---|---|
| Using lb/MWh as lb/kWh | Result 1,000 times too high | Divide lb/MWh by 1,000 first |
| Mixing pounds and kilograms | Result off by 2.2 times | Convert the factor before multiplying |
| Reporting carbon as CO2 | Result 3.66 times too low | Multiply carbon by 3.664 |
| Using a national average for a regional grid | Off by up to 3 times in the US | Use the eGRID subregion |
| Comparing CO2 with CO2e figures | CO2e reads higher (0.5% on the US grid, more with life-cycle data) | Keep one basis throughout |
More practical science: browse all our everyday science how-tos, from household chemistry to experiments you can build at home.
Frequently asked questions
The US grid averaged 767 lb of CO2 per MWh in 2023, which is 0.77 lb or 0.35 kg per kWh (EPA eGRID). The world average was 458 g of CO2-equivalent per kWh in 2025 (Ember).
CO2 emissions equal the electricity used in kWh multiplied by the emission factor in kg of CO2 per kWh. For 500 kWh at 0.348 kg per kWh, the result is 174 kg of CO2.
Multiply by 0.0004536. Dividing by 1,000 turns MWh into kWh and multiplying by 0.4536 turns pounds into kilograms, so 767.2 lb/MWh equals 0.348 kg/kWh.
US coal plants emitted 2.31 lb (1.05 kg) of CO2 per kWh in 2023, according to the EIA. A modern pulverized coal plant emits about 0.82 kg per kWh over its life cycle.
US natural gas plants emitted 0.96 lb (0.44 kg) of CO2 per kWh in 2023. Efficient combined-cycle plants emit about 0.41 kg at the stack and 0.49 kg over the full life cycle.
Solar panels emit no CO2 while generating. Over their life cycle, including manufacturing, the IPCC median is 41 to 48 g of CO2-equivalent per kWh, about one twentieth of coal.
Multiply the kWh on the bill by your regional grid factor. A 900 kWh month at the US average of 0.348 kg per kWh produces about 313 kg of CO2.
CO2 counts carbon dioxide only. CO2e adds methane and nitrous oxide converted to their CO2 warming equivalent, so CO2e factors are slightly higher.
Multiply the mass of carbon by 3.664, the ratio of the molar mass of CO2 (44.01 g/mol) to carbon (12.011 g/mol).
Sources
- US EPA. eGRID2023 Summary Data: subregion output emission rates
- US EIA. How much carbon dioxide is produced per kilowatthour of US electricity generation?
- US EIA. Electric Power Annual, Table 8.1: Average operating heat rate
- US EPA. GHG Emission Factors Hub
- Ember. Global Electricity Review 2026: major countries and regions
- IPCC. AR5 Working Group III, Annex III: Technology-specific cost and performance parameters

